In this article, we will see how to splice a LAN cable, a useful solution when you don’t have a long enough cable. Discover the two main methods to tackle this situation.
Introduction
Sometimes we find ourselves needing to splice a LAN cable. Although it’s not ideal, you may need to add length to an Ethernet cable that isn’t long enough. In this article, I will explore two methods to splice a LAN cable, one simple and one more complex.
Method 1: Splicing Plated Cables
If we need to splice two plated cables, the solution is simple: use an adapter. This device costs very little, about two euros, and it can be very useful to have one in your computer bag. Just insert one connector on one side and the other connector on the other side, and you are done. In this way, we can easily extend our LAN cable.
Method 2: Splicing Unplated Cables
If we are dealing with unplated cables, the situation is different. In this case, we can use a Connector Box. For example, for a category six cable, we can crimp the wires on one side and the other, and then close the Connector Box to splice the cables. This method is particularly useful when the wire is too short, as can happen in junction boxes.
Using the Connector Box
Inside the Connector Box package, you will find a diagram that will help you use the 568B standard, the most recent one. Just follow the numbers on the diagram and reproduce them exactly inside the Connector Box to splice the cables. It is important to have a tool to push the cables inside, in order to apply force and correctly insert the copper wires into the connectors.
Conclusion
If you have followed all the steps correctly, your splice should be complete. Remember to cut off any excess cables and make sure they don’t slip out. Once you are sure that everything has been done properly, you can proceed with network testing to ensure everything works correctly. With these tips, I hope I have helped you solve the problem of splicing LAN cables. Until next time!
